JETNA-LP, 1000-5000 W, 3-phase, ultra-low profile, fanless, mission-critical application

The series units, besides standard operation in a vast class of radioelectronic and electrical equipment, are meant to be used in critical missions: operation in emergency conditions, operation in case of compromised sealing of the equipment compartment, short-term higher than max power delivery.

Powerful 3-phase-input Low Profile (LP) units of AEPS-GROUP series JETNA-LP with improved power factor are made for 3-phase mains 400 (323-440 VAC, 390-620 VDC, 3 phases without N), 50 Hz and 220 (187-264 VAC, 263-372 VDC, 3 phases without N), 50 Hz – on request. It’s possible, on request, to provide 400 Hz input models. DC inputs may be used too in any polarity, please consult with the producer.

Made for conductive cooling systems, operational in case temperature range of -60…+100 °С. Other cooling systems may be used too (please see the datasheets).

Electrical features: all JETNA-LP units utilize output synchronous rectification, which brings their efficiency up to 94% – 95%. The units include full set of service functions, up to active current sharing parallel operation. On request it’s possible to order models with high output voltages, up to 400 VDC.

Constructional features: series units JETNA-LP achieve a unique combination of compact design and high efficiency. This results in unprecedented power density of 35 to 42 W/inch3 in their respective power range. Aluminum or copper case base has stiffening ribs and also serves for conductive cooling. Considering that all components significant in weight are connected to the base and submerged in heat-transferring potting – resistance to and durability against mechanical stress is unique. Unique property of the series is ultra-low-profile height (only 29 mm for JETNA1000-LP and 39 mm for JETNA5000-LP) and extreme temperature operating range of –50° C to +85° C or60° C to +85° C (on request).

AEPS-GROUP JETNA-LP units are optimal to be utilized in application fields 1, 2, 3, 4, 5, 6, 7, 8, 9, 11 – for sealed and protected spaces as well as for aerial objects at heights up to 15 km in unsealed and unprotected spaces: planes, drones, helicopters, hot air balloons and gliding devices, meteoprobes. Also applied in all types of land transport – railway locomotives and wagons, cars, tracked vehicles. The units are also an optimal fit for telecom equipment, mining, supercomputers, radars and informational displays and screens, located in outdoors conditions. At the same time, JETNA-LP units operate in Arctic and Antarctica, in mountains at all heights and in cold or hot deserts etc.

To know more, read following essays: About input ranges, About efficiencyAbout planarity.

JETNA1000-LP

Output power up to 1000 W
Power density up to 36 W/In³
Efficiency up to 94 %
174х92х29 mm
Case operating temperature -60° to +100° C
Request units PDF Datasheet 3D .STEP

JETNA2000-LP

Output power up to 2000 W
Power density up to 37 W/In³
Efficiency up to 94 %
210х116х37 mm
Case operating temperature -60° to +100° C
Request units PDF Datasheet 3D .STEP

JETNA3000-LP

Output power up to 3000 W
Power density up to 37 W/In³
Efficiency up to 94 %
250х141х38 mm
Case operating temperature -60° to +100° C
Request units PDF Datasheet 3D .STEP

JETNA5000-LP

Output power up to 5000 W
Power density up to 42 W/In³
Efficiency up to 94 %
300х170х39 mm
Case operating temperature -60° to +100° C
Request units PDF Datasheet 3D .STEP